You are situated: 

Burners with flat shape of flame

Czech English Russian    
Introduction    Print    Site map      
   Inquiry   

Burners with flat shape of flame, type HPP 1,1T

Burners type HPP 1,1T are gas burners with nominal power 1.1 MW. These are atmospheric burners (the combustion air is sucked in by the draught in the furnace) with partial premixing of gas + combustion air. They are equipped with a stabilization gas injector burner type SHI-B15.

The burner consists of an air box equipped with air register, of a gas injector burner with a noise suppressor and a stabilization gas injector burner. The burner also features a primary refractory-concrete burner fitting piece. 

Application

They are designed for heating of pipe heating and reaction furnaces in the petrochemical industry in cases where flat flame shape is required. It is possible to combust various types of gaseous fuel. Burners are equipped with noise suppressors.


Basic parameters of the burners

normal capacity 1)

MW

1.1

design capacity

MW

1.32

regulation range capacity

-

1 : 5

excess combustion air coeficient

-

1.1 - 1.15

combustion air temperature

o C

ambient

noise level La

dB(A)

max. 85

CO content in flue gas 2)

mg/m3N

max. 50

NOx content in flue gas 2)  3)

mg/m3N

max. 150

draft in combustion space

Pa

20 - 200

pressure of fuel gas on pilot burner

kPa

50 - 100

pressure of fuel gas for design capacity

kPa

100

weight of burner (without burner block)

kg

83

dimensions

-

EV 963


1)     The capacity value is only illustrative.

2)     The values are given for the temperature of combustion air 20 °C.

3)     The values are counted for 3% O2 content in waste gases, NOx values are stated as NO2.



Drawings:

 Drawing numbers of individual burner types are marked in the text. Clicking the drawing number will display the applicable burner type.



Are you interested in?